by Raymond Petros

Colloidal silver results when the molecular structure of silver is altered. The substance is then suspended in a liquid solution.

Colloidal silver has been made easy to produce at home. Now home owners can make their own batch of colloidal silver following a few simple procedures and make use of it for various medicinal purposes.

supplies for colloidal silver

In order to make CS at home you need to obtain a certain amount of pure silver. In this case two silver coins would suffice. Along with this you will also require a six volt transformer and two alligator clips.

You will also require some distilled water and a fish tank oxygenation bubbler with at least 2 feet of neoprene tubing. Lastly you will need a glass quart jar and a small airtight glass container.

Making silver colloids

Step 1

The process starts by thoroughly cleaning all your equipment and supplies. The silver coins that will be used during the process need to be properly cleaned in order to derive pure colloidal silver.

Step two

The DC connector needs to be plugged off at the end of the transformer wire. However the other end that goes into the wall should be left as it is.

Separate the wires of the cut end from the strip. At least one inch of the insulation covering from the wires should be clipped. However care must be taken not to damage the wire.

Step 3

The bare wires then need to be joined to the two alligator clips. They can be secured in the proper place via soldering or crimping.

The two silver coins will be made to function as electrodes. They will be placed right below the alligator clamps on opposite sides.

4th step

The neoprene tube needs to be put on the bottom surface of the jar containing the silver coins. Fill the jar up to the 8 oz mark ensuring that the water level comes up the lower end of the clips.

No part of the metal clamps should be in the water as the only elements that should be submerged in the water are the two silver coins.

5th step

Next up the oxygenation units and transformers need to plugged in and the water should be left to bubble for up to five hours.

6th step

Once the time has passed the machinery must be shut and the residue cleaned.

You will be amazed to know that you can make use of the same silver coins to generate numerous batches of colloidal silver, more so than you will ever require.

You can additionally purify the colloidal silver that you have obtained by siphoning it into a storage bottle using the tubing rather than pouring it.

Adhere to the above mentioned guidelines to make as much colloidal silver with ease at home.

About the Author:
The author runs an information website with various resources and the option to buy colloidal silver. If you would like to learn to make colloidal silvers click on the links.

Popularity: 1% [?]

You Should Also Check Out This Post:

More Active Posts: